Drywall FramingNiles drywall framing accessories are made from durable, hot-dipped
galvanized steel that provides superior corrosion protection.
Niles drywall framing accessories are made from durable, hot-dipped galvanized steel that provides superior corrosion protection.
Niles Building Products’ Drywall Corner Bead is an extremely durable, hot-dipped galvanized bead that provides superior corrosion protection. Flanges are deeply knurled for excellent joint compound adhesion. Ideal for high traffic areas, this drywall finishing corner bead is easily installed by using drywall nails, staples, screws or clinching tool.
| LENGTH | PCS/CRTN | FT/CRTN | CRTNS/ PALLET |
|---|---|---|---|
| 8″ | 63 | 504 | 49 |
| 9″ | 56 | 504 | 49 |
| 10″ | 50 | 500 | 49 |
| 12″ | 42 | 504 | 49 |
NOMINAL WEIGHT/CRTN – 56 LBS, NOMINAL WEIGHT/PALLET – 2744 LBS
For additional information, please download our spec sheet:
Niles 093 Zinc Control Joints are used for large expanses of ceiling and wall areas, both drywall and veneer. Excellent for large partitions and from door headers to ceilings. Tape protects 1/4″ openings, 7/16″ deep; 3/32″ grounds.
Note: A sure seal behind joints must be placed where fire ratings are observed and sound transmissions are a factor.
| CRTNS/ PALLET | NOMINAL LBS/CRTN | NOMINAL WT/PALLET* |
|---|---|---|
| 20 | 32 | 640 |
25 PCS/CRTN – 250 FT/CRTN
*Pallet weights may vary.
For additional information, please download our spec sheets:
Niles Resilient Channel reduces transmission of airborne sound through partition and ceiling assemblies. The resilient channel dampens sound waves effectively, dissipating the energy and reducing sound transmission.
| NILES RESILIENT CHANNEL | SIZE | LENGTH | PCS/BNDL |
|---|---|---|---|
| RC-1 ONE LEG, 25 GAUGE | 1/2” x 2” | 12′ | 20 |
| RC-2 TWO LEGS, 25 GAUGE | 1/2” x 2-1/2” | 12′ | 20 |
50 BNDLS/PALLET
For additional information, please download our spec sheets:
Available in two sizes, the Niles Furring Channel is used as a cross furring member for attachment of gypsum wallboard or lath on ceilings or furred masonry walls.
| SIZE | GAUGE | LENGTH | PCS/BNDL |
|---|---|---|---|
| 7/8″ x 2-1/2” | 25 | 10′ & 12′ | 10 |
| 7/8″ x 2-1/2” | 20 | 10′ & 12′ | 10 |
| 1-1/2″ x 2-3/4” | 25 | 10′ & 12′ | 10 |
| 1-1/2″ x 2-3/4” | 20 | 10′ & 12′ | 10 |
50 BNDLS/PALLET
For additional information, please download our spec sheet:
U-Channel CRC (Cold Rolled Channel) is most commonly used as a bridging method to provide bracing in metal framing systems.
Note: Cold Rolled Channel will not provide adequate bracing if not properly attached to the framing member.
| SIZE | LENGTH | PCS/ BNDL | WEIGHT/ BNDL | WEIGHT/ PALLET* |
|---|---|---|---|---|
| 3/4″ | 10′ | 20 | 50 lbs | 1000 lbs |
| 3/4″ | 16′ | 20 | 80 lbs | 1600 lbs |
| 1-1/2″ | 10′ | 10 | 45 lbs | 900 lbs |
| 1-1/2″ | 16′ | 10 | 75 lbs | 1500 lbs |
20 BNDLS/PALLET
*Pallet weights may vary
Available in 16 gauge.
For additional information, please download our spec sheet:
Flat strapping is used for lateral bracing, joist bridging and diagonal bracing to prevent racking.
| SIZE | LENGTH | PCS/BNDL |
|---|---|---|
| 2″ | 10′ | 10 |
| 4″ | 10′ | 10 |
| 6″ | 10′ | 10 |
20 BNDLS/PALLET
Available in 16, 18, 20 and 25 gauge.
For additional information, please download our spec sheet:
Niles Corner Angle is produced for miscellaneous attachments of intersecting framing components and right angle corner enclosures at lapped framing conditions of non-load bearing framing.
| SIZE | LENGTH | PCS/BNDL |
|---|---|---|
| 1-1/2″ x 1-1/2″ | 10′ | 10 |
| 2″ x 2″ | 10′ | 10 |
| 3″ x 3″ | 10′ | 10 |
50 BNDLS/PALLET
Available in 25 and 20 gauge.
Other gauges available upon request.
For additional information, please download our spec sheet:
Niles Building Products, an industry leader in expanded metal and vinyl building accessories, with manufacturing facilities in Niles, OH, Grand Prairie, TX and Jacksonville, FL.